CNC

• Simple program input via keyboard, tape or disk.
• Background editing and programming for increased productivity.
• Gauging of main and crank pins diameter and thrust faces, enable crankshaft measuring and generation of the grinding cycle.
• Contour gauging enables cam profile mapping and grinding profile generation without the need of the cam master.
• Cam profile and the valve opening curve can also be varied/corrected via CNC built in functions.

Operating Controls

• The intuitive, ergonomic and logical arrangement of the operating control ensures most convenient operation.
• The portable PCU-terminal enables machine operation in safe conditions while closely checking on the grinding operation.

Safety Features
Safe operation is ensured by

• Touch detector for continuous monitoring of the contact between grinding wheel and workpiece, grinding wheel and dressing device results in minimal non-cutting times. The device works also as Integrated collision detection system.
• The wheel spindle drive motor control incorporates a load meter so that if the pre-set limits are passed, an overcurrent condition will initiate an emergency stop.
• Two front sliding doors for full enclosure of the working area during machine grinding operation.
• During loading/unloading of the workpiece (front doors are open), two fences/panels automatically separate the working area from the wheelhead (that slides all the way back along the X axis) and the operator is fully protected even with the grinding wheel rotating.
• Lynx2000 has been built according with the CE norms and EMC directives regulating manufacture of machine tools.
• All safety features have been arranged in such a way as not to hinder the ergonomy of the machine and the production of the operator.